ARDUINO electronic building block Ethernet Ethernet module W5100 network module red board
Package / Case:
"""Introduction: W5100 is a multifunctional monolithic network interface chip, which has 10/100 Ethernet controller, which is mainly used in high integration, high stability, high performance and low cost embedded system.. Use Internet to achieve the W5100 connection without the operating system. W5100 is compatible with 10BASE-T 802.3u and 100BASE-TX IEEE802.3. W5100 integrated hardware, and after many years of market verification TCP/IP protocol stack, Ethernet medium transport layer (MAC) and physical layer (PHY). The use of W5100 do not need to consider the Ethernet control, simply port (Socket) programming. Product characteristic - multiple interfaces can be chosen: direct bus, indirect bus and SPI bus; - supports hardware TCP/IP protocol stack, supports TCP, UDP, ICMP, IGMP, ARP, PPPoE., IPv4 - up to 4 separate ports; - internal integrated 16KBYTE transceiver caching; - multiple information indicating output, including RX, TX, Full/Duplex, Colision, Link, Speed; - supports automatic polarity conversion (DMI/MDIX); - 3.3V power supply, IO signal compatible with 5V voltage; - with the network port, double 2*14 2.0mm pin; Arduino official Ethernet library. Rhododendron aureum"